The Historic Calibration dialog box displays the calibration settings used by a pre-Echoview 5.0 EV file. Such EV files used an early calibration setting model where calibration values were modified within the EV file. From Echoview 5.0, the calibration methods for this early calibration model are unavailable.
The Echoview 5.0 modern calibration model uses ECS files to modify calibration values.
To use or view historic calibration point to Help menu > Historic Calibration.
Note: Echoview's current calibration setting name list is available via this dialog box. With the dialog active, Press CTRL + SHIFT + L > Shortcut menu > Select All > Shortcut menu > Copy. Paste the list of settings in a convenient place like a plain text file. Calibration setting names can be used in ECS files or COM scripts.
Displays the name of the EV file. The current EV file is the default. Use the browse button to select an EV file.
The historic calibration for the selected EV file is displayed in the Settings section below EV file. You can select and copy text from the Settings section, to paste into an ECS file. Calibration settings for raw and virtual variables is displayed.
Note: Only calibration setting names and their values are usable in an ECS file. Other information (appearing in the ECS file) may not be recognized by Echoview.
About calibrated data
About calibration settings
How to enter calibration settings