ESRI World File Interpretation dialog box
The ESRI World File Interpretation dialog box is used to choose whether or not to position a raster image in a scene using an associated ESRI world file.
The dialog box is displayed automatically when you import a raster image and Echoview identifies an associated ESRI world file. Echoview will only identify an ESRI world file if it has the same name as the raster image and is stored in the same folder as the raster image.
|
Settings |
Description |
|
File name |
Displays the path and filename of the ESRI world file that Echoview has associated with the raster image you are importing. The table below the File name box lists the contents of the ESRI world file. |
|
Datum |
Selects the latitude/longitude coordinate system used to generate the raster image. Note: Only WGS 84 is supported. |
|
Units |
Selects the unit system (meters or degrees) that was used to define:
|
|
Projection |
Selects the projection system used to generate the raster image. This is fixed as UTM if meters are selected as the Units. This is fixed as Geographic if degrees are selected as the Units. |
|
Zone |
Selects the UTM zone in which the reference point of the image is located. Note: This is only available if meters are selected as the Units. |
|
Ignore file |
Click this to bypass the ESRI world file and manually enter all positioning information for the raster image. |
See also
Import a raster image into a scene
Import 3D Raster Image dialog box