Calibration Information dialog box
The Calibration Information dialog box can display a complete list of calibration settings or the specific calibration settings used by a pre-Echoview 5.0 EV file. Pre-Echoview 5.0 EV files used an early calibration setting model where calibration values were stored within the EV file. From Echoview 5.0, the calibration methods for this early calibration model are unavailable.
The Echoview 5.0 modern calibration model uses data files and ECS files to specify calibration values.
To view and use calibration information, click Help menu > Calibration Information. Use Select All and Copy/Paste to place the list of settings in a convenient place like a plain text file. The copied calibration setting names can be used in ECS files or COM scripts.
Settings
The calibration information for the selected EV file is displayed in the Settings section. The default (no EV file) displays a complete list of available calibration settings.
Note: Only calibration setting names and their values are usable in an ECS file. Other information in the Calibration Information listing for a pre-Echoview 5.0 EV file will not be recognized in an ECS file.
EV file
Displays the name of the EV file. The default (no EV file) displays a complete list of available calibration settings. Use the browse button to select an EV file or type its name into the box. Pre-Echoview 5.0 EV files display their EV file-specific calibration settings.
See also
About calibrated data
About calibration settings
How to enter calibration settings